Making a open source quadrotor using DJI 450 frame
1. Main materials Quadcopter frame: F450 HJ450 DJI Four sets of Motors and ESC: A2212 1000KV (brushless motor), 30A ESC Bullet connector: 3.5mm Four pairs of propellers: 1045 Flight controller: Pixhawk2.1 standard set RC receiver-transmitter set: Spektrum DSMX quad race receiver with diversity [Optional] Landing gear 2. Assembly Frame Power distribution for motors Motor & ESC connector Overall power distribution: for a pixhawk2.1, Jetson TX2, and motors. (A 4cells Lipo battery with 4000mAh is chosen in my case) Assembly result: basic requirements Reference: [1] http://ardupilot.org/copter/docs/connect-escs-and-motors.html